MTP 3 User Adaptation (M3UA) - SIGTRAN Stack

By -


M3UA is a protocol for supporting the transport of any SS7 MTP3-User signaling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol (SCTP). In addition, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signaling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database.

SG: SG is a Signaling Agent, which interface between the SS7 and IP network. It appears the SS7 SP to the SS7 .  SG is logical entity with contains the one of more SGP.

SGP: SGP is logical instance of SG. SGP is a physical entity, which has the association between to ASP. All SGP within the SG have the view towards the SS7 Network.

AS: AS is a logical entity, which serves as a specific Routing key. It is present in IP domain. An AS contains set of one or more ASP. There is 1:1 mapping of AS to routing key i.e. there is one routing per AS.

ASP: ASP is process instance AS. it is physical entity which have association with the SGP. Unlike SGP, An ASP can be part of one or more AS.

IPSP: IPSP is a process instance of IP-based application. it is same as ASP but not connected to SS7 network via SGP.  When two users are present in IP domain we only need IPSP.

Routing Key: Routing key is set of SS7 parameters and parameter values that uniquely define the signaling traffic to be handled by particular AS.

Routing Context: RC is a unique identifier of a Routing key.  RC can user configurable. The scope of RC is global on SGP side.                                    

                                         ASP/IPSP                                           SGP/IPSP
                                         ===================================
                                                     ——————- ASP UP————–>
              INACTIVE State      <—————–ASP UP ACK———
                                                     ——————-ASP ACTIVE——–>
                   ACTIVE state      <————ASP ACTIVE ACK——-
                                                     ——————BEAT——————->
                                                     <—————-BEAT ACK————-

To make down the M3UA association:

                                      ASP/IPSP                                                   SGP/IPSP
                                      =======================================
                                                      ——————-ASP DOWN————–>
                                                      <——————ASP DOWN ACK——-
                                                      ——————-ASP INACTIVE———->
                                                      <—————–ASP INACTIVE ACK—–

Comments

Post a Comment

Popular posts from this blog

Intelligent Networks (IN) and CAMEL

By -
Image
Intelligent Networks (IN) :-  Intelligent Networks is a concept service intelligence resides in a central node called an SCP and SSPs (residing on Switches) relinquish control to this node at particular stages in a call so that appropriate service logic can be applied. Objectives of IN: - Increased Service Velocity / Speed of Deployment - Increased Range of Services - Evolvability from Existing Networks - Service & Vendor Independent Implementation - MSC just focuses on core job of call processing Network Before IN:   Before IN application, there was messed network for every node: Network with IN : After IN implementation, Network is organised. Basic Concepts  – PIC and DPs & BCSM: Point In Call (PIC)  :  A state in a basic call state model. Detection Point (DP)  :  A point in basic call processing at which specific event is detected. Detection Points represent  transitions  between points in call processing
Read more

Diameter Messages

By -
Capability Exchange: When two peers established transport connection, they must exchange the capability exchange message. this message allows the discovery of peer's identity and its capabilities. Once transport layer is established, CER and CEA exchanged to determine the capability of peer endpoint followed by DWR/DWA. In below example DiameterNodeA start diameter connection with DiameterNodeB after transport layer connection established. In case of TCP (Syn/Syn-Ack) and  SCTP (Init/Init-Ack/Coockie Echo) exchanged. In case of SCTP Connection establishment(CER, CEA, DWR, and DWA) are exchanged with setting out-of-order delivery false to avoid race-condition and for connection termination (DPR/DPA) set the timer to receive out-of-order message before terminating the connection.               DiameterNodeA                     DiameterNodeB                                     <------Transport Layer Established--------->                ---------------------- CER -------
Read more

SRVCC - Single Radio Voice Call Continuity

By -
SRVCC enables continuity of voice call anchored in IMS network, when UE changes its access network from packet based in eUTRAN to circuit based GERAN or UTRAN, without requiring the UE to have simultaneous access to both the radio network.   It accomplishes this by enhancing the MMEs, serving E-UTRAN and the 3GPP CS MSC serving GERAN/UTRAN such that when the UE is still anchored within the E-UTRAN network and triggers a measurement report indicating a need for handover (HO) to GERAN/UTRAN, the MSC can initiate IMS service continuity procedure towards the IMS domain in addition to preparing for a handover into its GERAN/UTRAN access, before the UE is directed to change its access network to GERAN/UTRAN.     The SRVCC feature requires the new Sv interface between MSC and MME. Sv Interface runs over UDP. Following messages are exchanged over Sv Interface:   - PS to CS Request - PS to CS Response - PS to CS Complete Notification - PS to CS Complete Acknowledge - PS t
Read more